Teodorescu, Remus, Weinreich, Nicolai A., Bilgin, Berke, Zhuang, Yi, Prochazka, Wenzel · Nov 1, 2026
arXiv: Parameterisation of NMC and LFP 4680 cells for electrochemical and thermal modelling
Markdown · JSON · Original source
The authors present an electrochemical-thermal model of two 4680 cylindrical cells: a NMC811/graphite cell and a BYD FC4680 LiFePO4 cell. Their thermal DFN couples an electrode-stack model to a two-node thermal balance. They parameterise the cells using teardown geometry and open literature, tag values by provenance, and calibrate both sets using the same approach. For the NMC cell, the calibrated model follows mean can temperature within 0.52 and 1.46 K in reported 1C and 2C charge tests. For the LFP cell, it follows can temperature within 0.44 K and 0.76 K in 1C and 2C discharges, and reproduces temperature peaks and relaxation after cut-off. The authors also identify where this representation falls short. It does not describe the NMC can’s axial gradient under contact heating, or the LFP voltage’s gradual decline before the knee at 2C. They say that decline points to a distribution of particle states in the electrode. The parameter sets and bench data are openly available. The results show how the authors’ calibrated model matches these specific tests, while the stated gaps matter for representing temperature and voltage behavior the model does not capture.
Headline and summary by Escape Meridian, prepared by Luna from the attributed source. A source check is not independent confirmation of the source’s claims.
Original source
eess.SY · Article
Source details
Original source date: Nov 1, 2026 (2026-11-01).
Date basis: Date basis not provided.
Added to Escape Meridian: 2026-11-10T09:18:05.998Z. First observed: 2026-11-03T08:51:27.274Z. Retrieved: 2026-11-03T17:34:26.051Z.
Referenced by
Recorded citations and public file attachments. A reference alone does not establish agreement or influence.
No public references recorded here yet.
Limits
The authors say the single can node and single representative particle do not describe the NMC can’s axial gradient under contact heating or the LFP voltage’s gradual decline before the knee at 2C.
Open question
How might the model represent the NMC can’s axial gradient under contact heating and the LFP voltage decline before the knee at 2C?
Source-stated
The authors present a thermal DFN for two 4680 cells, using a Doyle-Fuller-Newman electrode-stack model coupled to a two-node thermal balance.
a Doyle-Fuller-Newman model of the electrode stack coupled to a two-node thermal balance of the roll and the can (a thermal DFN, TDFN)
Source-stated
For the NMC cell, the calibrated set follows mean can temperature within 0.52 and 1.46 K in the reported 1C and 2C charge tests.
the calibrated NMC set follows the mean can temperature within 0.52 and 1.46 K
Source-stated
For the LFP cell, the calibrated set follows can temperature within 0.44 K and 0.76 K in 1C and 2C discharges, reproducing peaks and relaxation after cut-off.
the calibrated set follows the can temperature within 0.44 K (1C) and 0.76 K (2C), reproduces the peaks and the relaxation after cut-off.
Source-stated
The authors identify the NMC can’s axial gradient under contact heating and the LFP voltage decline before the knee at 2C as features the model does not describe.
a single can node and a single representative particle do not describe: the axial gradient of the NMC can under contact heating, and a gradual decline of the LFP voltage before the knee at 2C
Source-stated
The authors state that the parameter sets and bench data are openly available.
The parameter sets (BPX, CSV) and the bench data are openly available.
Source and contributor context
Teodorescu, Remus, Weinreich, Nicolai A., Bilgin, Berke, Zhuang, Yi, Prochazka, Wenzel · Article author
These are credits stated by the source; they do not establish a profile match or authorship of every passage.
Source media
No suitable media was found by the supported page extraction.
Terms and references
Reference context selected by Escape Meridian; separate from source evidence. Entity mentions do not establish authorship, involvement or endorsement.
arXiv
arXiv is a research manuscript repository where authors share papers that may not yet have been peer reviewed.
Tesla
Tesla publishes company material about vehicles, energy systems, manufacturing and automation.
Editorial provenance
Version 1. Publication ID: 84952750-4c21-470b-8830-356404723e0b.
Prepared by gpt-6-luna; grounding review by gpt-6-luna.
Source check: uncertain by anthropic/claude-opus-5.5 on 2026-11-10T09:18:05.998Z. This checks fidelity to the source, not whether its claims are independently true.
Editorial selection: accept; reasons: material_development.
Observation: 3ec26400738e59dbb32fb8908e496253fdb23a67ddc7ad572a691bb5d6b1402a. Source text hash: cfbdac981ee6683d7ec8d6f90998930e9fe6da73be284038d8792ff1c7224553.
Revision and source-check history
Version 1 · 2026-11-10T09:18:05.998Z
arXiv: Parameterisation of NMC and LFP 4680 cells for electrochemical and thermal modelling
The authors present an electrochemical-thermal model of two 4680 cylindrical cells: a NMC811/graphite cell and a BYD FC4680 LiFePO4 cell. Their thermal DFN couples an electrode-stack model to a two-node thermal balance. They parameterise the cells using teardown geometry and open literature, tag values by provenance, and calibrate both sets using the same approach. For the NMC cell, the calibrated model follows mean can temperature within 0.52 and 1.46 K in reported 1C and 2C charge tests. For the LFP cell, it follows can temperature within 0.44 K and 0.76 K in 1C and 2C discharges, and reproduces temperature peaks and relaxation after cut-off. The authors also identify where this representation falls short. It does not describe the NMC can’s axial gradient under contact heating, or the LFP voltage’s gradual decline before the knee at 2C. They say that decline points to a distribution of particle states in the electrode. The parameter sets and bench data are openly available. The results show how the authors’ calibrated model matches these specific tests, while the stated gaps matter for representing temperature and voltage behavior the model does not capture.
Original source
eess.SY · Article
Source details
Original source date: Nov 1, 2026 (2026-11-01).
Date basis: Date basis not provided.
Added to Escape Meridian: 2026-11-10T09:18:05.998Z. First observed: 2026-11-03T08:51:27.274Z. Retrieved: 2026-11-03T17:34:26.051Z.
Limits
The authors say the single can node and single representative particle do not describe the NMC can’s axial gradient under contact heating or the LFP voltage’s gradual decline before the knee at 2C.
Open question
How might the model represent the NMC can’s axial gradient under contact heating and the LFP voltage decline before the knee at 2C?
Source-stated
The authors present a thermal DFN for two 4680 cells, using a Doyle-Fuller-Newman electrode-stack model coupled to a two-node thermal balance.
a Doyle-Fuller-Newman model of the electrode stack coupled to a two-node thermal balance of the roll and the can (a thermal DFN, TDFN)
Source-stated
For the NMC cell, the calibrated set follows mean can temperature within 0.52 and 1.46 K in the reported 1C and 2C charge tests.
the calibrated NMC set follows the mean can temperature within 0.52 and 1.46 K
Source-stated
For the LFP cell, the calibrated set follows can temperature within 0.44 K and 0.76 K in 1C and 2C discharges, reproducing peaks and relaxation after cut-off.
the calibrated set follows the can temperature within 0.44 K (1C) and 0.76 K (2C), reproduces the peaks and the relaxation after cut-off.
Source-stated
The authors identify the NMC can’s axial gradient under contact heating and the LFP voltage decline before the knee at 2C as features the model does not describe.
a single can node and a single representative particle do not describe: the axial gradient of the NMC can under contact heating, and a gradual decline of the LFP voltage before the knee at 2C
Source-stated
The authors state that the parameter sets and bench data are openly available.
The parameter sets (BPX, CSV) and the bench data are openly available.
Source and contributor context
Teodorescu, Remus, Weinreich, Nicolai A., Bilgin, Berke, Zhuang, Yi, Prochazka, Wenzel · Article author
These are credits stated by the source; they do not establish a profile match or authorship of every passage.
Source media
No suitable media was found by the supported page extraction.
Terms and references
Reference context selected by Escape Meridian; separate from source evidence. Entity mentions do not establish authorship, involvement or endorsement.
arXiv
arXiv is a research manuscript repository where authors share papers that may not yet have been peer reviewed.
Tesla
Tesla publishes company material about vehicles, energy systems, manufacturing and automation.
Editorial provenance
Version 1. Publication ID: 84952750-4c21-470b-8830-356404723e0b.
Prepared by gpt-6-luna; grounding review by gpt-6-luna.
Source check: uncertain by anthropic/claude-opus-5.5 on 2026-11-10T09:18:05.998Z. This checks fidelity to the source, not whether its claims are independently true.
Editorial selection: accept; reasons: material_development.
Observation: 3ec26400738e59dbb32fb8908e496253fdb23a67ddc7ad572a691bb5d6b1402a. Source text hash: cfbdac981ee6683d7ec8d6f90998930e9fe6da73be284038d8792ff1c7224553.
uncertain · 2026-11-10T09:18:05.998Z · anthropic/claude-opus-5.5
Publication: 84952750-4c21-470b-8830-356404723e0b
attribution — pass: The reading consistently attributes the model, calibration results, limitations and data availability to the paper's authors. It does not present the fit results as independently verified. It also preserves that the NMC comparison uses the charge test of Ank et al.
Against the 1C and 2C charge test of Ank et al., the calibrated NMC set follows the mean can temperature
summary — uncertain: The summary is faithful, but a reader without specialist background would struggle to follow it. Central terms are never explained in plain language or flagged for tooltips: 4680, NMC811, LiFePO4/LFP, Doyle-Fuller-Newman, two-node thermal balance, 1C/2C, K, can, knee, axial gradient, teardown, provenance. The closing significance sentence is circular and does not say why accurate battery thermal models matter. Smallest repairs: add tooltips or term-library entries for these terms, and state plainly that the paper builds and openly shares calibrated temperature and voltage models for two large EV battery cells.
date — pass: originalPublished is 2026-11-01. This matches the arXiv v1 submission of Sun, 1 Nov 2026. It is not the later feed date.
[Submitted on 1 Nov 2026]
support — pass: Every claim and excerpt matches the abstract: the TDFN structure, the NMC fit within 0.52 and 1.46 K, the LFP fit within 0.44 K and 0.76 K with peaks and relaxation, the stated limitations, and the open data. The question follows directly from the stated gaps. It adds no unsupported benefits or forecasts.
What remains is what a single can node and a single representative particle do not describe
media — pass: The selected media is the verified direct arXiv abstract page for this paper. It is the most direct access to the source.
Challenge or correct this reading
Send a correction or an opposing source with this reading’s URL. Disagreement and uncertainty can remain unresolved.
Tesla publishes company material about vehicles, energy systems, manufacturing and automation.
Explore TeslaarXiv is a research manuscript repository where authors share papers that may not yet have been peer reviewed.
Explore arXivTesla publishes company material about vehicles, energy systems, manufacturing and automation.
Explore TeslaarXiv is a research manuscript repository where authors share papers that may not yet have been peer reviewed.
Explore arXiv